Request for Submission of Asphalt Resurfacing Work

ASPHALT RESURFACING

After several years, your course entrance needs asphalt resurfacing to make it look new as it loses its smooth, matte appearance. It ages and gets damaged due to various factors: weather, weathering, oils, essences, and general wear and tear. It. The process is much cheaper than completely new asphalt. Asphalt resurfacing is the installation of a layer of asphalt on the old coating of your asphalt driveway; giving it a new life while increasing its durability. Instead of removing your existing asphalt, we add a new layer of asphalt over the old coating. This new layer is about 2 inches thick and one layer of glue/bitumen is applied for its adhesion to the existing paving.

Is resurfacing a good investment?
Certainly. In this way, an asphalt layer is obtained that is much thicker, applied on a base that has benefited from several years of compaction. Conditions that are optimal!

When to opt for asphalt resurfacing?

Wondering if you need to do asphalt resurfacing or full asphalt? Depending on the condition of your residential or commercial asphalt pavement, one of these options may be more advantageous than the other for you. It is not possible to perform resurfacing on all surfaces. During the initial visit, our asphalt expert will check that certain conditions are met :

The granular foundation must be of good quality.
The drainage slope must have been maintained over the years.
The level of the terrain must be able to accommodate an additional thickness of asphalt.

If any of these conditions are not met, a complete re-laying of asphalt made within the standards will have to be considered.

Advantages of Asphalt Resurfacing

Reduce the cost of your asphalt work
Positive environmental impact
Speed of execution of asphalt.

The procedure of Asphalt Resurfacing

Cleaning your existing asphalt
We will start by plucking and burning the herbs to the root, afterward, we will clean with brooms and a high-pressure blower so that your old asphalt is residue-free.
Application of liquid bitumen
We will apply a layer of bitumen that will act as glue to maximize the adhesion of the new asphalt layer to your old asphalt.
Installation of the asphalt layer
We will install and level a new layer of asphalt on your old asphalt entrance.
Compaction of the asphalt
We will compact with a compaction plate, to begin with, and subsequently using a road roller to have maximum compaction of your new asphalt entrance.